木質ペレットプレス販売

Various capacities of 木質ペレットプレス

Biomass wood pellet press machine is a kind of pellet fuel molding machinery with all kinds of branches, wood, wood chips, corn stalks, straw stalks, wood chaff, wood powder, sawdust and other agricultural wastes as raw materials, the pellets made by this machinery can be used in fireplace, boiler, biomass power plant.

Wood pellets can replace the original coal oil fuel, the use of more economical and environmentally friendly. This also shows that the market economic value of wood pellet machine is huge. In addition, we also provide straw pellet machine, rice husk pellet machine and other biomass pellet machine, all using advanced technology.

These machines in the pellet production process through the crushing and pressurization, densification molding and all the production process can produce quality grade, uniform size of the pellet products, these biomass particles are convenient for storage and transportation, cost-effective is also very high.

Below are various models of RICHI wood pellet press for sale.

MZLH320 ウッドペレットプレス

The wood pellet presses are based on ring die design, easy to operate.

容量：
300-400 KG/H

メインパワー：
37KW

見積依頼

MZLH350 wood pellet press machine

The wood pellet press machine is designed for making various wood fuel pellets.

容量：
500-700 KG/H

メインパワー：
55KW

見積依頼

MZLH420 sawdust pellet press

The sawdust pellet press adopts stainless steel design, long working service time.

容量：
1.0～1.2トン/時

メインパワー：
110KW

見積依頼

MZLH520  biomass pellet press

The machine is widely applicable, and can process various biomass materials into biomass pellets.

容量：
2.0-2.5 T/H

メインパワー：
160KW

見積依頼

MZLH768 木質ペレットプレス

The wood pellet press for sale is widely used in wood pellet line for various production capacities.

容量：
2.5-4.0 T/H

メインパワー：
250KW

見積依頼

MZLH858 wood pellet compressor

The machine is equipped with safety device, which can protect the machine from overlaoding.

容量：
毎時3～4.5トン

メインパワー：
280KW

見積依頼

Specific parameters of RICHI wood pellet press for sale are as follows:

wood pellet manufacturing process

Generally speaking, take the raw material is log as an example, the wood pellet manufacturing process is raw material preparation → chipping section → crushing section → drying section → pelletizing section → cooling section → sieving and packing section. Of course, the specific production process depends on the customer’s needs, if you have any pelletizing needs, welcome to contact us to customize a specific pelletizing solution for you.

01 Raw Material Receiving

First, prepare sufficient raw materials. Collect the raw materials and prepare them for the next step.

02 Chipping section: Wood chipper

If the raw material is logs, the diameter and length of the logs are too big to be put into the crusher directly. Therefore, we generally recommend our customers to equip a chipper specially designed for chipping the logs to 3-5cm thin slices. This size of wood chips can easily enter into the crusher to complete the crushing. About the choice of chipping machine, it depends on your output and your log type and size. You can tell us what your raw material is, we will recommend the most suitable machine for you.

03 Crushing section: wood hammer mill

After chipping, the logs are chipped to 3-5cm pieces. The wood chips enter into the crushing section through the conveying equipment. Generally there is cleaning equipment installed on the top of the crusher, such as cylindrical primary sieve, permanent magnetic cylinder, etc. The cleaning equipment can effectively remove the impurities that may be contained in the raw materials, to ensure the purity of wood pellets and at the same time can also make the machine from getting injured. Then the wood chips enter into the pulverizer for crushing, the pulverizer can crush the wood chips to 2-3mm crushed wood chips.

04 Drying process: rotary dryer

Whether the crushed wood chips can directly enter the pelletizing section depends on the moisture content of the raw material. If the moisture content of your raw material is around 15-20%, then there is no need for drying, and it can directly enter to the pelletizing machine for pelletizing. But if the moisture content of your raw material is higher than 20%, it needs drying. If you are a wood pellet manufacturer of mass production of wood pellets, it is suggested that you can equip a dryer for drying. If your production is small for your own use and the moisture content is low, you can choose to dry it in the sun before pelletizing.

05 Pelletizing process: biomass wood pellet press

Congratulations you have processed the raw material to the right moisture content and size, then you can enter the most critical pelletizing section. The wood chips enter to the biomass pellet press for pelletizing. The wood chips first enter into the feeder of the pellet mill for wood pellets, RICHI wood pellet press for sale is equipped with frequency conversion feeder, you can adjust the motor according to your own output and production needs, and then adjust the feeder feeding speed and feeding volume. Then the wood chips are extruded into wood pellets in the pelletizing chamber and squeezed out from the die holes, and cut into uniform size wood pellets by the cutter.

05 Cooling process: counterflow cooling machine

After granulation is complete, there is another key step that cannot be ignored, that is, cooling the pellets. The temperature and humidity of the freshly made wood particles are quite high, and the wood pellets are easily damaged at this time, so it is necessary to cool them to room temperature with a cooling machine before entering the next section.

05 Screening and packing section

After the pellets are cooled down, the wood pellets will be strong inside and smooth outside. If the appearance and size of the wood pellets have higher requirements, the wood pellets can be screened before packing, and the unsuitable size of the pellets can be screened out by the screening equipment and processed again. Qualified wood pellets can be directly entered into the finished product warehouse and then packaged through the packaging machine.

よくある質問 木質ペレットプレス

How much does a wood pellet press cost?

Generally speaking, the price of our wood pellet press for sale is between $10,000-$100,000. It is just a possible range of wood pellet press price.

There are very many factors that determine the wood pellet press price, different manufacturers, different quality, different output, the wood pellet press cost will be different. So when choosing a pellet mill you should not just consider the price of the pellet mill, you should first ensure the quality of the pellet mill, and then choose the right price of the wood chip pellet mill equipment.

お見積り＆サービス

How to choose wood pellet compressor?

Wood pellet press is a popular pelletizing equipment used to make wood pellets. The pellet equipment on the market is various, and the quality is also uneven. So how to choose a wood pellet mill? リチ・マシナリー, as a professional wood pellet mill manufacturer, summarize the following suggestions for you.

Quality

When choosing a バイオマスペレット機, the first thing we need to consider is how its quality is. After all, the quality of the wood pellet machine directly determines the quality of the wood pellets you make. And at present, the wood pellet industry is very hot, the production of wood pellet machine manufacturers are also many, so in the discernment of the quality of wood pellet machine, we recommend that you can go to the field inspection of the factory and compare a few manufacturers, choose the equipment with good quality

Production Process

The so-called process is the process of producing wood pellet equipment. You can ask the manufacturer how their equipment is produced and whether it has passed the ISO, CE and other international certifications.

production capacity

Production is a major factor in determining the price, production of large machines and equipment is large, the corresponding price is also higher. So be sure to combine their own production needs to choose the right output of granulator equipment. Of course, we recommend that you choose the best production capacity is greater than your production needs of the equipment, because the equipment used for a long time will inevitably have wear and tear, production capacity is greater than your production needs can be in the machine has broken, low efficiency can also meet your production needs.

原材料

The raw material of biomass wood pellet fuel is required to be 2-3MM in size and 10-15% water content, then the raw material does not meet this condition should be processed, let’s say the branches or the scraps, then you have to use the crushing equipment, if the water is big, you have to use the drying equipment, you not only need to buy the pelletizing machine equipment, but also need to buy the auxiliary equipment to complete the pelletizing.
　

お見積り＆サービス

Which raw materials are suitable for sawdust pellet press？

RICHI wood pellet press for sale can not only press crushed branches, wood shavings, sawdust, trees, etc. into wood pellets. At the same time, the sawdust pellet press can also process all kinds of biomass raw materials into biomass pellets, such as rice husk, grass, leaves and so on. Biomass pellet press is applicable to a wide range of raw materials, almost all biomass raw materials can be processed into wood pellets through the 木質ペレット機.

If you are not sure whether your raw materials can be used for processing, you can leave your contact information, tell us your raw materials, we can do a free test for you, tell you whether it is suitable for wood pellet machine.

お見積り＆サービス